Whether renovating your bathroom or simply looking to replace an old holder, knowing the correct placement, size, and style of your toilet paper holder can make all the difference.
This guide provides you with the essential information and tips about the ideal toilet paper holder height and distance.
|Toilet Paper Holder Specification||Measurement|
|Standard height||26 in (66 cm)|
|ADA height||Min. 19 in (48.26 cm)Max. 36 in (91.44 cm)|
|Distance from toilet||Max. 12 in (30.48 cm)|
|Lateral placement||8-12 in (20.32-30.48 cm) to either side of the toilet bowl|
|Toilet paper standard size||Approx. 4.5 in (11.43 cm) wide|
What height should a toilet paper holder be?
The standard height for a toilet paper holder is approximately 26 in (66 cm) above the floor. This height is typically comfortable for most adults and is easy to reach without straining. To measure this, start from the floor and mark your spot on the wall or side of the vanity.
The usual spot for a toilet paper holder is about 26 in (66 cm) off the floor. It’s considered the ideal height for most people to comfortably reach when sitting. The best way to determine the ideal height for a DIY makeover is to extend your arm, mark the hand’s position, and measure the height from the floor to the mark.
ADA toilet paper holder height
For those installing a toilet paper holder in a public restroom or a home where someone with a disability may use the bathroom, the Americans with Disabilities Act (ADA) has set guidelines. According to ADA standards, the toilet paper holder should be placed between a minimum height of 19 in (48.26 cm) and a maximum height of 36 in (91.44 cm) above the floor. These measurements ensure the holder is accessible to all individuals, including those using wheelchairs.
If you’re setting up a toilet paper holder in a public restroom or a home that someone with a disability might use, refer to the Americans with Disabilities Act (ADA) guidelines. According to ADA, the holder should be somewhere between 19 in (48.26 cm) and 36 in (91.44 cm) above the floor.
How far to place a toilet paper dispenser from the toilet?
The rule of thumb is that the holder should be no more than 12 in (30.48 cm) from the toilet bowl. It’s an optimal distance for comfortably reaching the toilet paper without straining or shifting your position.
Where should a toilet paper holder be placed?
Install the toilet paper holder about 8 to 12 in (20.32 to 30.48 cm) to either side of the toilet bowl. It depends on your preferences, the bathroom layout, and whether you’re left- or right-handed. If you’re worried that the toilet paper holder might be too close to the sink or shower and that it will get wet, just pop it on the other side.
Are toilet paper holders standard size?
Although toilet paper holders come in various sizes and styles, such as wall-mounted, recessed, or free-standing, there isn’t a strict standard size. On the other hand, most types are designed to fit a standard roll of toilet paper, which is usually about 4.5 in (11.43 cm) wide. The size of your holder could affect where and how you install it.
How to install a toilet paper holder?
To measure the right height and distance from the toilet bowl, mark those spots, drill holes, and attach the holder with screws or adhesive. Use a level so it’s not crooked, and follow the instructions that come with the holder.
Where to hang a toilet paper holder in a small bathroom?
In a small bathroom, finding the right spot for your toilet paper holder can be a challenge. You may need to get creative. Consider placing the holder vertically (e.g., above the toilet) or on the side of the vanity if it’s within the recommended distance. Remember, the goal is to ensure the toilet paper is easily and comfortably accessible to the person using the toilet.
Finding the right spot for a toilet paper holder in a tiny bathroom might be a bit tricky, so it’s best to get creative. For example, place the holder above the toilet bowl, on the side of the vanity, or beneath it if there’s enough room. The goal is to ensure the toilet paper is easy to reach for the toilet user.